Ayce C2065A, Руководство оператора, Страница: 85 / 103

GB
WIRELESS SENSOR
Note:
MAIN UNIT
Remove the battery door of the sensor.
Insert 2 x AA size batteries into the battery compartment. Make sure
you insert them the right way according to the polarity information
marked on the battery compartment.
Close the battery door.
Once the channel is assigned to one sensor, you can only change it by
removing the batteries or resetting the unit.
Avoid placing the sensor in direct sunlight, rain or snow.
1.
2.
3.
Remove the battery door of the main unit.
Install 4 new AA size batteries according to the polarity information
marked on the battery compartment and then press [ RESET ] key by
using a metal wire to reset the unit.
Close the battery door.
Once the batteries are installed, all the segments of the LCD will be
shown
1.
2.
3.
4.
Note:
To avoid the wireless sensor and main unit pairing failure, please
power up the sensor/s first, and then press [ RESET ] key on the main
unit (no need on sensors).
84 | 85