Ayce ALM 36-1 Li, Инструкция по эксплуатации

Страница: 92 / 106

.
Place the plug of charger (9) in a socket (220-240 V~/50-60 Hz). The green LED
will be permanently lit.
.
Push the battery pack onto the battery charger. The red LED will come on to
indicate that the battery pack is being charged. When the charging process is
finished, the green LED will be permanently lit. The time it takes to fully recharge
an empty battery is approximately 3-5 hour.
.
Pull the power plug of the charger out of the socket outlet.
LED indicator of charger:
GREEN light ON:
The charger is powered on or the battery has
been fully charged.
RED light ON:
The battery is being charged.
GREEN light Flashes:
The temperature of battery is too low or too
high.
STOP charge and wait until the battery
temperature comes into normal range.
RED light Flashes:
The battery is defective.
Warning! Do not charge a defective battery.
That may result in injuries and a fire risk.
You should return both the battery pack and charger to dealers for electrical
check.
If the rechargeable battery pack fails to charge, check whether there is voltage at
the socket outlet.
If you still fail to charge the battery pack, please return the complete equipment
together with the battery charger to our customer service center. Timely
recharging of the battery will help it serve you well for a long time.
You must recharge the battery pack when you notice that the power of the
equipment drops. Never allow the battery pack to become fully discharged. This
will cause it to develop a defect.