Ayce 7613164329271, Оригинальное руководство пользователя

Страница: 74 / 88

OPERATION
1. Before use
• Remove any packing material and loose parts from unit.
• Check the accessories before use. It should be fit with the machine and your
purpose.
2. Functions
a. Setting the depth (Fig.1)
Fig. 1
• You can adjust the depth in variables
of 0.2 mm from 0 to 2 mm by turning
the setting knob for the depth.
• Turn the setting knob for the depth in
a clockwise direction to set a greater
depth.
• Turn the setting knob for the depth in
a counter-clockwise direction to set a
lower depth.
• After finishing work, set the depth so
that the blades are lowered and thus
protected from damage.
• Turn the setting knob for the depth to
position “P” for this purpose.
b. Parallel Stop (Fig.2)
WARNING
!
Always ensure that the machine is switched off and plug is removed
from the power supply before making any adjustment.
Fig. 2
• The parallel stop is secured to the
side of the machine by using parallel
stop knob.
• Adjust the distance from the blade
and secure with locking nut.
•
NOTE:
as it is a guide, make a test cut
on a scrap of timber prior to making
any cut on the work piece.