l
Leave the doors open to prevent any unpleasant smells while the
refrigerator is not used.
Cleaning
When cleaning the refrigerator the electric plug must be removed from the
power supply.
Use water or a non-abrasive detergent on a soft cloth and remove the
moisture with a dry soft cloth. Remember to clear the defrost drain at the back
just above the glass cover.
Replacing the light bulb
If the internal light does not work anymore, disconnect then reconnect at once the
device. If the light does not still work, verify if the light bulb is correctly screwed. If in
spite of these tests, there is no light, it is necessary to change the light bulb. Use a
220-240V~, 10W light bulb.
Disconnect the appliance;
Open the light cover (1);
Undo the defective light bulb anticlockwise.
Screw the new light bulb clockwise.
DOOR REVERSE
Users can change the direction of opening according to one's own needs. The
concrete operating sequence is as follows:
1. Screw off the two bolts which in
the back of the top cover with cross
opener, take off the top cover,
screw off the six square nut of the
doorpost of the right side.
2 . L i f t t h e d o o r u p w a r d s t o
d i s e n g a g e i t f r o m t h e m i d d l e
hinge. Put the door to one side and
lay it down gently on a padded
surface.
-29-