GB-6
3. PICTURE ROTATIONS
Press RIGHT and LEFT navigation buttons to rotate the
picture Clockwise and anti-clockwise respectively.
4. PICTURE FLIP AND TURN
Press UP navigation button to flip the picture up or
down.
Press DOWN navigation button to flip the picture left or
right.
5. PICTURE ZOOM IN/OUT
Press ZOOM button continuously, the picture zooms in
by 2, 3, 4 times or zooms out by 1/2, 1/3, 1/4 the
original size.
Press this button once more when the picture getting
1/4 size to return to the normal play.
If the picture is enlarged, you may use the navigation
buttons to view blocked parts of the picture.
6. SLIDE SHOW TRANSITION MODES
During slide show playback, press the PROGRAM
button cyclically to select one slide show transition
effect to play picture.
EXTERNAL MEMORY MEDIA OPERATION
(USB&SD/MMC CARD)
Prepare the player for External Memory media
operation
1. Slide the POWER switch to ON position, Insert a
USB data traveller filled with media files into the USB
port or plug the SD/MMC card into the card slot, the
USB or the SD/MMC card is successfully detected
and read. A media menu shows on the screen, select
a corresponding media type via navigation right/left
button for play the inserted card or USB and press
OK/ENTER Button to confirm. Folders show on the
screen and use navigation buttons to select your
desired folder and track to play.
2. Press NEXT or PREVIOUS button to skip forward or
backward.
Note: Press and hold STOP button to call out the
source menu and make selection among USB, card
and disc via navigation RIGHT/LEFT button, press
OK/ENTER button to enter the selected mode.
CAUTION: To avoid electronic static discharge, don't
touch the USB port and card slot during playback.
INITIAL SETTINGS
Initial settings page is for you to make your preferred
settings up for your player. Once the initial settings are
done they are retained in the CPU of the player until
otherwise modified.
COMMON PROCEDURES FOR INITIAL SETTINGS
1. Press SETUP button on the remote or press and
hold OK/SETUP button on the unit to enter the setup
menu.
2. Use the navigation buttons to select the item you
want to modify, setting page with further setting items
displayed shows on the TV screen. Again use
navigation buttons to make changes. Press
OK/ENTER button to confirm modifications.
3. Use navigation buttons to switch to another setting
on the main setting page.
4. Press SETUP button on the remote or press and
hold OK/SETUP button on the unit to exit main
setting page.
1. SYSTEM SETUP
1.1 TV SYSTEM
- it is used to select the TV mode.
Please select this option as per your TV set.
1.2 SCREEN SAVER
- when the player is not in used
for several minutes, a running DVD logo will move
across the TV screen to protect the TV screen.
Options: On: Screen saver is enabled
Off: Screen saver is disabled
1.3 TV TYPE
- it is used to select the TV scan mode,
please set as per your TV set.
Options: 4:3PS : Normal Pan & scan mode
4:3LB : normal Letter box mode
16:9 : 16:9 wide screen mode
1.4 PASSWORD
- input password to unlock the system.
The steps are as follows:
1.4.1 Enter SYSTEM SETUP, select the PASSWORD
item by scrolling the down navigation button, and then
press the right navigation button to select the input box.
1.4.2 Input user's password "0000" to unlock it, in this
case, select the input box again to change the
password by inputting another new four numeric
numbers and then press ENTER/OK button to confirm.
When the password is changed, you are needed to
input the new one to unlock the system.
1.4.3 Once you forget your own password, use the
supervisor's password "8200" to unlock it.
NOTE: If wrong password was input in unlock status,
the system will lock.
1.5 RATING
- Set the rating of this player. If you want to
change the rating of parental lock, please input the
password to unlock first.
Options: 1 KID SAFE / 2 G / 3 PG / 4 PG 13 / 5 PG-R /
6R / 7 NC-17 / 8 ADULT
1.6 DEFAULT
- Reset to factory settings.
Options: RESTORE
2. LANGUAGE SETUP
2.1 OSD LANGUAGE
- It is used to select different On
Screen Display language for different user.
2.2 AUDIO LANG
- select preferred audio language.
(DVD only, need disc software support)
2.3 SUBTITLE LANG
- Select preferred subtitle
language.
(DVD only, need disc software support)
2.4 MENU LANG
- Select preferred disc menu
language.
(DVD only, need disc software support)
3. VIDEO SETUP
3.1 BRIGHTNESS
- to set the brightness for the
display.
Options: 0/2/4/6/8/10/12
3.2 CONTRAST
- to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
3.3 HUE
- to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
3.4 SATURATION
- to set the saturation level for
display.
Options: 0/2/4/6/8/10/12
4. SPEAKER SETUP
4.1 DOWNMIX
Options: LT/RT - Left/Right mix mode
STEREO - Select this option if you don't have
a 5.1 channels amplifier.
