Axxess HYKIA-01, Руководство по установке

Страница: 8 / 12

8
To manually set the radio type
1. Turn on the ignition and the radio
2. Within the first 20-seconds of the ignition being turned on, press and hold
down the volume down button on the steering wheel for 20-seconds.
3. The LED will go solid, which is located on the 16-pin side of the interface.
4. Release the volume down button and the LED will turn off
5. Press the volume up button the number of times corresponding to
the radio type.
6. When the number of presses matches the radio Number—press down the
volume down button.
7. The radio type is now stored.
8. The LED will blink the number of time corresponding to the radio type selected.
1st led flash is for Eclipse
2nd led flash is for Kenwood
3rd led flash is for Clarion
4th led flash is for Sony and Dual
5th led flash is for JVC
6th led flash is for Pioneer and Jensen
7th led flash is for Alpine*
8th led flash is for Visteon
9th led flash is for Valor
10th led flash is for Clarion 5v
* Note: If the LED flashes 7 times and you do not have an Alpine radio connected
to it that means that the HYKIA-01 did not see any radio connected. Verify the
3.5mm connector is connected to the SWC input on the radio.