AXSWC GENERAL INSTRUCTIONS
I N S TA L L AT I O N I N S T R U C T I O N S
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
REV. 2/14/20 INSTAXSWC General Instructions
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Installation Preparation ........................................2
Installation .............................................................2
Programming .........................................................3
Wire Description ....................................................3
AXSWC General Instructions
• One interface does it all, no
additional interfaces needed
• Designed to be compatible
with all major radio brands
• Auto detects vehicle type, radio
connection, and preset controls
• Ability to dual assign steering
wheel control buttons
• Can be manually programmed
for most vehicles
• Retains settings even after
battery disconnection or
interface removal
• All connections done at the
radio location
• Micro-B USB updatable
• AXSWC Interface
• AXSWC harness (12-pin harness with male 3.5mm jack)
• 3.5mm adapter
for more detailed information about the product and up-to-date
vehicle specific applications
