background image

9

REV. 7/24/2018 INSTAX-GMCL2-SWC

  •  Listed below are the advanced menu options:

•  Show Text – Exits menu.
•  Set Tuning Mode – Allows the user to select tuning by preset or channel.
•  Set Preset – Allows the user to program presets.
•  Set Display – Allows the user to choose which satellite radio information should be 

displayed.

Note:

 If using the AX-LCD, SEEK UP controls the top line on the display; SEEK DOWN the 

bottom line.

•  Set Satellite Radio Text Mode - Allows the user to set the display length of the satellite 

radio information. Options are; On, Off, or 5 seconds (default is 5 seconds).

  •  To access AUX-IN or rear seat entertainment, press and hold the SOURCE button on the 

steering wheel for 2 seconds. This will switch to the next source available. Each time the 
SOURCE button is pressed for 2 seconds the source will change. The sequence of sources are 
SAT/RSE/AUX-IN. The AX-LCD will provide a visual confirmation of what source you are on.

EXTRA FEATURES 

(CONT)

STEERING WHEEL CONTROL SETTINGS

L.E.D. feedback

The (18) 

Red

 L.E.D. flashes represent what brand radio the AX-GMCL2-SWC believes it is 

connected to. Each flash represents a different radio manufacturer. For example, if you are 
installing a JVC radio, the AX-GMCL2-SWC will flash (5) times. Following is a legend that 
dictates which manufacturer corresponds to which flash.

L.E.D. feedback legend

*  Note:

  If the AX-GMCL2-SWC flashes Red (7) times, and you do not have an Alpine radio connected 

to it, that means the AX-GMCL2-SWC does not detect a radio connected it. Verify that the 3.5mm 

jack is connected to the correct steering wheel jack/wire in the radio.

** Note: 

 Part number AX-SWC-PARROT is required (sold separately). Also, the Parrot radio must be 

updated to rev. 2.1.4 or higher through www.parrot.com.

†  Note:

  If you have a Clarion radio and the steering wheel controls do not work, change the radio 

type to the other Clarion radio type; same for Eclipse. The following section explains how to do this.

‡  Note:

  If you have a Kenwood radio and the L.E.D. feedback comes back as showing as a JVC radio, 

change the radio type to a Kenwood. The following section explains how to do this.

1 flash - Eclipse (Type 1) †
2 flashes - Kenwood ‡
3 flashes - Clarion (Type 1) †
4 flashes - Sony / Dual
5 flashes - JVC
6 flashes - Pioneer / Jensen
7 flashes - Alpine *
8 flashes - Visteon
9 flashes - Valor

10 flashes - Clarion (Type 2) †
11 flashes - Metra OE
12 flashes - Eclipse (Type 2) †
13 flashes - LG
14 flashes - Parrot **
15 flashes - XITE
16 flashes - Philips
17 flashes - TBD
18 flashes - JBL

Continued on the next page

Содержание AX-GMCL2-SWC













Отзывы: