Axxess AX-AU12-SWC, Руководство по установке

Страница: 8 / 12

8
Radio legend
1. Eclipse (Type 1)
2. Kenwood
3. Clarion (Type 1)
4. Sony/Dual
5. JVC
6. Pioneer/Jensen 7. Alpine
8. Visteon
9. Valor
10. Clarion (Type 2)
11. Metra OE
12. Eclipse (Type 2) 13. LG
14. Parrot
15. XITE
16. Philips
17. TBD
18. JBL
Remapping the steering wheel control buttons
Let’s say you have AX-AU12-SWC initialized and you want to change the button
assignment for the steering wheel controls. For example, you would like “Seek-Up” to be
“Mute”. Follow the steps below to remap the steering wheel control buttons:
1.
Ensure the AX-AU12-SWC is visible so you can see the L.E.D. flashes to confirm button
recognition.
Tip: Turning the radio off is recommended.
2.
Within the first 20 seconds of turning the ignition on, press and hold the “Volume-Up”
button on the steering wheel until the L.E.D. goes solid.
3. Release “Volume-Up”, the L.E.D. will then go out; “Volume-Up” has now been
programmed.
4. Follow the list in the Button Assignment Legend, to reference the order in which the
steering wheel control buttons need to be programmed.
Note: If the next function on the list is not on the steering wheel, press the Volume-Up button
for (1) second until the L.E.D. comes on, and then release the Volume-Up button. This will tell
the AX-AU12-SWC that this function is not available and it will move on to the next function.
5. To complete the remapping process, press and hold the Volume-Up button on the
steering wheel until the L.E.D. in the AX-AU12-SWC goes out.
1. Volume-Up
2. Volume-Down
3. Seek-Up/Next
4. Seek-Down/Prev
5. Source/Mode
6. Mute
7. Preset-Up
8. Preset-Down
9. Power 10. Band
11. Play/Enter
12. PTT (Push to Talk)
13. On-Hook
14. Off-Hook
15. Fan-Up *
16. Fan-Down *
17. Temp-Up *
18. Temp-Down *
Button assignment legend
Note: Not all radios will have all of these commands. Please refer to the manual provided
with the radio, or contact the radio manufacturer for specific commands recognized by that
particular radio.
* Not applicable in this application
STEERING WHEEL CONTROL SETTINGS
(CONT)
Continued on the next page