background image

 

HE 5700 Pilot valve box Quick guide 
# 422691 | Version 1.1 

 

2.2 

Signal words 

 

DANGER! 

Indicates an imminently hazardous 

high 

risk situation, which, if not avoided, will result in death 

or serious injury. 

WARNING! 

Indicates a potentially hazardous medium risk situation, which, if not avoided, could result in 
death or serious injury. 

CAUTION! 

Indicates a hazardous low risk situation, which, if not avoided, could result in minor or 
moderate injury. 

 

2.3 

Safety in the individual operating phases 

 

 

Danger of Electrocution! 

Before working on the device, switch off all power supplies used. The 
electrical cables must be laid according to the respective national 
regulations (in Germany VDE 0100). The measuring cables must laid 
separately from the power lines. Connect the protective earth connector 
(in the respective equipment carrier) to the protective earth conductor. 

 

 

Danger of Electrocution! 

Any interruption of the protective earth in the equipment carrier can result 
in the device becoming a hazard. Intentional interruptions are not 
permitted. If there is a suspicion that it is no longer possible to operate 
the device safely, it must be shut off and secured against being 
unintentionally switched on. 

 

 

Danger of Electrocution! 

Do not open the device when it is connected to the voltage! When 
opening the devices or removing covers and parts, live parts may be 
exposed. Connection points can also be live! 

 

 

Attention! 

The device must never be put into operation even if damage is 
recognisable.

 

 

 

Attention! 

During installation, commissioning, maintenance and troubleshooting, 
observe the accident prevention regulations applicable to your system, 
e.g. DGUV Regulation 3 "Electrical installations and equipment". 

 

 

Attention! 

Clean dirty contacts with oil-free compressed air or ethyl alcohol and a 
lint-free cloth. 

 

 

Warning of material damage caused by electrostatic charge! 

Observe  the  safety  measures  according  to  BS  EN  61340-51/-3  to  avoid 
electrostatic discharge!

 

 

Содержание Hesch HE 5700



















Отзывы: