Axxera ASBT504, Руководство пользователя

Страница: 6 / 16

6
INSTALLATION
Input Connections
The input source of the Smart EQ can use either the RCA preamp outputs or High Level
speaker wire inputs from the head unit or Bluetooth A2DP streaming from a connected
Bluetooth device.
Note : User can select the audio signal source using the app on the Bluetooth connected
device. The default Audio Source is the head unit.
High-Level Input
(speaker wire)
Low-Level Input
(RCA)
Low Level Inputs(RCA)
• Low level(RCA) input signal is
preferred for best performance.
Typical trunk-mount installations
require a 17-20 foot RCA cable.
Using twisted pair RCA cables
will minimize noise.
High Level Input(Speaker wires of head unit)
• High level inputs should only be used
when RCA outputs are not available from
the head unit. Connect the head unit speaker
outputs to the high level input connector
as shown.
Notes : Do not use both low and high level inputs at the same time – connect only one
or the other. When no audio signal, power LED will blink one per a second. If music is
played, this LED turn on solid.
Terminal
Block
L’CH.
R’CH.
TO CHASSIS
GROUND