Axvue E650, Инструкция по эксплуатации

Страница: 9 / 11

Tips!
This product package including one monitor, one camera and parts, if necessary,
to buy at the official website of the company or authorized agents.
In case the problem can be resolved in accordance with the following method specification
Common Problems and Solutions
No picture or sound
1. Make sure the camera and monitor are paired
2. Make sure the camera and the monitor are turned on
Squealing sound coming from speaker on monitor
1. The need to monitor and camera distance of 1 m or more
2. Turn the volum down using Volume Control
1. Press the video On-Off button once to turn on video mode. Check to make sure nothing is
blocking the camera
2.Test reception by moving the monitor and/or camera to different locations
3.Make sure the camera and monitor are paired
Sound but no picture
1. Turn up the volum using Volume Control
2. Power the monitor completely off, remove and re-insert the bturn monitor back on.
3. Make sure the camera and monitor are paired arrey, then
Picture but no sound
6UYOZOUTZNKSUTOZUXIRUYKXZUZNKIGSKXG
2. Move the monitor away from other electronic devices, cordless phone, etc. Test reception
by moving the monitor and/or camera to different locations
3. Adjust the brightness using the Brightness Control
Picture not clear
Tone: When the battery is low, the monitor will emit a continuous sound
three times, until no battery or recharge the battery. When the distance
between the monitor and the camera is too far or interference caused
not normally receive the signal, the display will show 'OUT OF RANGE',
and issued three consecutive sound, plug the monitor from the camera
to get closer to the position.