Check settings
of TEC 7300
•
Step 1.1:
•
•
Check that the correct nozzle
type is mounted in the gun.
•
The nozzle type can be
identified by the color:
•
Red = narrow spray fan
(recommended nozzle type )
•
Yellow = Medium spray fan
•
Blue = Wide spray fan
Don’t
forget that there is also the
different size of hole!
We recommed
Red 1,2 mm
nozzle
TYPE 6053
Содержание TEC 7300
