Ethernet Packet Generator
USER GUIDE
APG-UG-V2-1
33
8 February 2018
Button
Action
Applies the Network Configuration changes to the unit.
Changing the Network Configuration while connected to the
unit over a network connection will immediately disconnect
the unit from the APG Control Interface.
Open a new
connection with the new address to continue to manage the unit.
Closes the Network Configuration window without applying the changes.
6.3.7
Edit - Counter Configuration
Counters (eg TxPackets), status indicators (eg Speed) and calculated values (eg TxRate) can
be added or removed from the Counter Panel display list, and re-ordered within the display
list.
All counters are always active, so can be viewed or hidden without affecting the counter
values.
Counter management is performed using the Counter Configuration window:
Display Pane
Available
Counter
Pane
Separator
Selected Counter
Insert Point
The following control buttons are available:
Button
Action
Adds the selected counters to the DISPLAY COUNTER pane at the
insert
point
. The
insert point
can be moved UP and DOWN using the EARLIER
and LATER buttons.
Adds a spacer to the DISPLAY COUNTER pane at the
insert point
Moves the currently selected counters in the DISPLAY COUNTER pane UP
Moves the currently selected counters in the DISPLAY COUNTER pane
DOWN
Removes the selected counters from the DISPLAY COUNTER pane
Applies the Counter Configuration changes to the Control Interface.
The displayed counters will update immediately.
Closes the Counter Configuration window.
