AXTON A530DSP, Руководство по установке и эксплуатации, Страница: 3 / 23

– 4 – – 5 –
TECHNICAL SPECIFICATIONS
Music Power Output (4 ohm): 52 W x 4
RMS Power Output (4 ohm): 30 W x 4
Frequency response: 20 Hz ~ 20 kHz
Audio sampling frequency: 192 kHz
Distortion: 1 KHz <0.001%
Supply voltage range: 9V – 15V
Signal to noise ratio: > 120 dB
Dynamic range: > 100 dB
Standby current: < 0.4 mA
Maximum operating current: 15 A
Dimensions (LxWxH): 151(172) x 114 x 40 mm
MAIN FEATURES
n
4-channel Smart Digital Amplifi er with iOS or Android App controlled audio DSP
functions
n
DSP-controlled 5-channel Preout (6 Volt) including REM out to control additional
amplifi ers
n
Plug’N’Play quick installation system via optional vehicle brand and model specifi c ISO
wire harness
n
4-Channel RCA-Input and separate ACC/REM/Batt/GND socket for standalone
operation
n
Auto-Turn-On function
FUNCTIONALITY & ADJUSTABILITY
n
Freely confi gurable active crossover: High-/Low-/Band-/Bypass with 6/12/18/24dB
Oct. slope for Front, Rear and Subwoofer channel
n
Time Alignment in cm (0 – 230cm) for front, rear and subwoofer channel
n
5 channel control: Gain, Phase switch and Mute function for each speaker
n
Freely confi gurable 7-band parametric Equalizer for front, rear and 4 speaker
n
Can save 5 memories in the amp and unlimited sound settings on the smartphone
n
Dynamic Bass setting for powerful performance without subwoofer
n
3D surround sound
INSTALLATION DIAGRAM
MOUNTING INSTRUCTIONS
1. Before you start with the installation, make sure you know the security code of your
headunit (if applicable).
2. Remove the headunit from the dashboard and disconnect the main wire.
3. Find a place for the A530DSP and connect the provided (or optionally available
car-specifi c) wire to the amp.
4. For standalone powering mode please follow these steps: Run a 1.5 mm
2
power wire
from the (+) pole of the battery to the (BATT) terminal of the amplifi er. Use a fuse with
the related value of the cross section of the power wire. The distance between the
B+ pole and the fuse holder must be 15 cm or less. Run the minus cable with the
same cross section from the (GND) terminal of the amp to the vehicle chassis ground.
Make sure that the contact surface is clean in order to get best conductance.
5. Connect the RCA cables and the ACC+/REM wire coming from the headunit to the
RCA inputs and ACC-In of the A530DSP.
6. Install the headunit back in the dashboard.
HEAD UNIT
ORIGINAL CAR SOCKETS