AXT ELECTRONIC VSE, Инструкция пользователя

Страница: 8 / 10

1
AXT-electronic GmbH & Co.KG * Wartburgstraße 10 * 99817 Eisenach * service@axt-electronic.de * www.axt-electronic.de
From this point on, the device can work correctly with our default settings.
The following is the default setting:
Opening: 8 (a.m.) at the earliest, when light
Closing: at dusk, but not later than 22h (10 p.m.)
Setting applies to all days of the week.
Settings at 1. Start – Basic Settings
1. -
activate the Menu (= hold Magnet for 3sec. at “OK/Menu”)
1. Menu-Item = „
Sprache
“ > „Language“ you need to change it to english
-
Go into the menu-item with “OK”
2. -
With "down" set language to "2. English"
-
Confirm the setting with "OK
-
The setting of the time-of-day follows directly...
3.
2. Menu-Item = „
time of day
“
-
Go into the menu-item with “OK”
4. -
Cursor is positioned on HOUR
hh
:mm
-
Use up or down to set current hour
-
Confirm with OK
5. -
Cursor is positioned on MINUTE hh: mm
-
Use up or down to set current minute
-
Confirm with OK
- The setting of the current date follows directly
6.
3. Menu-Item = „
Date
“
-
Go into the menu-item with „OK“
7. -
Cursor is positioned on YEAR
Year
/Month/Day
-
Use up or down to set current year
-
Confirm with ok
8. -
Cursor is positioned on MONTH Year/
Month
/Day
-
Use up or down to set current month
-
Confirm with ok
9. -
Cursor is positioned on DAY Year/Month/
Day
-
Use up or down to set current day
-
Confirm with ok
The use "ESC/Back" leads to canceling these three settings. Default values then are applied.
These can/have to be corrected later, see next points.
Menu operation from 2nd start - Application examples
a) Set or correct the current time e.g. 14:30 o’clock (2:30 p.m.)
1.
-
activate the Menu (= hold Magnet for 3sec. at “OK/Menu”)
-
Menu item "Time" is already the 1st menu item. Further selection is therefore not necessary.
2. -
Go into the menu-item with “OK”
3. -
Cursor is positioned on HOUR
hh
:mm
-
Use up or down to set current hour
-
Confirm with OK
4. -
Cursor is positioned on MINUTE hh: mm
-
Use up or down to set current minute
-
Confirm with OK
5. -
Setting completed
-
“Saved" is displayed. The setting was changed successfully.
6.
-
Cursor is back on menu-item "1. Time-of-day“
7. Press down to select a new menu item for setting, or select and confirm the last menu item "EXIT", or wait 1 minute and do not operate anything to have
the menu guidance end automatically.