Service Manual
Product
Axpert Max 3600-24
Doc No.
P1911061
Version
00
PAGE
For Axpert Max-3600 ALL of the MOSFET are
(TOSHIBA/TK100E08N1 214A 80V N BULK TO-220)
Parts
Attribute
Reference values
Failure status
TK100E08N1
Resistor
GS: 11.75k
GD: 115.8k
DS: OL
Short or explosion
Diode
SD: 0.463V
DS: OL
Note1:
When you use the multimeter to measure the resistor of the transistor, because of
the capacitor in the circuit, it will cause the changing of the values when you measure the
DS and GD. So we recommend you measure the diode forward voltage of SD, and the
resistor of GS. These two values can reflect the situation of the transistor more correctly.
Note2:
If one or more of them were damaged, please replace all of them.
3.1.1. Drivers (This part is only used for repair checking)
Note:
Drivers usually need to be checked when users want to repair the boards. Because
when power devices were damaged, the high voltage will rush to driver circuit through the
gates of power devices.
The reference of the resistors list as below:
R232/R236/R127/R128/R233/R237/R216/R190
R192/R241/R223/R224//R197/R243/R234/R225 All of the resistors are (22R 1206)
