22
Service Manual
Plus
MICROSPEED
3.1 Ventilation
TheMicrospeed plus must be affixed vertically on the bottom to
guarantee efficient cooling. The drives working temperature
must be between +0° C and +40° C. Supplementary ventilation
may be requested in accordance to size. See the table below.
3.0 Installation Notes
The Microspeed Plus is predisposed for mounting inside a box.
The mounting hole measurements can be found in chapter 1.4
"Drive Dimensions". The Microspeed Plus must be fixed vertically
on the bottom of the box to guarantee efficient cooling by the
drive itself. The positioning inside the box must satisfy the
following dispositions:
•
For best results from drive guarantee that inside the
electrical box a temperature between 0°C and +40°C with
humidity between 10% and 95% without condensation..
•
Keep the drive from excessive mechanical vibrations in
the electrical box.
•
During installation, insure avoiding any kind of metallic
residue from falling inside of the Microspeed Plus.
•
Maintain a distance of 80mm from the heat source.
•
The electrical box must have a predisposition for oppor-
tune air filtering holes or passageways.
Installation
Model
1/2
2.5/5
6/12
10/20
14/28
20/40
60
n.a
n.a
n.a
n.a
NV
NV
140
N
N
N
N
NV
NV
200
N
N
N
NV
NV
BV