4
Model 15101XX1
•
Turn on the water supplies (1).
Remove the protective cover from the
sensor (2). Wait 15 seconds (3).
•
Place your hand in front of the sensor
to turn the water on (4). Check the
temperature of the water.
•
If adjustment of the temperature is
necessary, turn the water off at the
supplies (1). Remove the set screw
from the rear of the faucet using a
2.5 mm allen wrench (2).
•
Pull the faucet housing off (1).
•
Use a slot-head screwdriver to adjust
the temperature control screw (2).
Turn it clockwise to make the water
warmer, counter-clockwise to make
the water cooler.
•
Re-assemble the faucet and turn the
water on. Test again. Repeat the
process if necessary until the desired
temperature is reached.
Clean the Sink
•
Cover the sensor for 5 seconds (1). The
faucet will be shut off for approximately
75 seconds to permit cleaning (2).
