Axopar 37 XC Скачать руководство пользователя | Manualshive

Страница: 31 / 68

background image

4. Product description

4.2.8. 110/230 V system

You can choose to equip your boat with the optional extra of 110/230 V AC system with a shore power

connection, which will allow you to use devices that run on the standard mains current.
The system obtains its power from an external supply on shore or from the jetty (shore power). In the

European market the system used is 230 V and in the American market 110 V.
The system functions when a shore power cable has been connected to the shore power socket

connection.

1.

Turn off the shore power switch before connecting or disconnecting the cable.

2.

Connect the shore power cable to the boat before connecting it to the shore power.

3.

Disconnect the shore power cable from the shore power before disconnecting from the boat.

4.

Close the hatch of the boat’s shore power connection.

The system’s main fuse is located in separate control panel. The system includes a battery charger,

which starts charging batteries automatically when the boat has been connected to shore power. The

location of the components is presented in the section

Electrical System

.

The shore power system should be checked at least biannually. Always disconnect the shore power

cable when the system is not in use. Metal casings of installed electrical equipment must always be

connected to earth in the boat electrical system. Use electrical equipment equipped with earth protection

only.

WARNING

• Do not touch an energized high voltage system.
• Do not change the plug of the shore power cable. Use compatible

connectors only.

• Try to minimize the risk of electric shock, short circuit and fire.
• Do not allow the shore power cable to hang in the water. If it does, a

hazardous electric field could be created in the water.

• Never modify the connections on the shore power cable. Use compatible

connectors only.

• If the earth fault breaker is tripped, disconnect the shore power cable

immediately. In such a case contact a qualified electrician for repairs

before the system is used again.

WARNING

To avoid an electric shock and risk of fire:

• Switch off the shore power switch before connecting and disconnecting

the cable.

• Connect the shore power cable to the boat before connecting it ashore.
• Disconnect the shore power cable ashore before disconnecting it from the

boat.

• Close the hatch to the shore power socket on the boat carefully, avoiding

getting it wet.

Axopar 37 XC

Document ID: 37XC202004EN

Owner's Manual

© 2020 Axopar Boats

Page 29

-

-

«
...
29
30
31
32
33
...
»

Содержание 37 XC





































































Отзывы:

Нет отзывов

Похожие инструкции для 37 XC

Бренд: Williams Страницы: 134

Бренд: Bombard Страницы: 188

Бренд: PURSUIT Страницы: 154

Бренд: NorthStar Страницы: 2

Бренд: Edey & Duff Страницы: 26

emotion KAYAKS STEALTH PRO ANGLER

Бренд: Lifetime Страницы: 8

Бренд: Sea-doo Страницы: 180

Бренд: Ranger Страницы: 77

Бренд: buster Страницы: 46

Ski Nautique 1996

Бренд: CORRECT CRAFT Страницы: 109

Бренд: Vanguard Страницы: 6

Бренд: Sailfish Страницы: 31

Бренд: Tartan Страницы: 72

XL700 WaveRunner 2003

Бренд: Yamaha Страницы: 117

Бренд: ANYTEC Страницы: 84

Бренд: Vanguard Страницы: 31

Classic Big Game

Бренд: Ocean Kayak Страницы: 1

Бренд: Baja Страницы: 82

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды