Axopar 22 SPYDER, Руководство пользователя

Страница: 49 / 118

7. Maintenance
7. Maintenance
7.1. Maintaining the gelcoat surface
When the boat is not in use, keep the gelcoat surface out of the sun or covered with a canvas tarpaulin.
Do not use plastic or other non-porous materials, which can trap moisture between the cover and the
surface.
• Wash the surface with a mild detergent.
For best results, use a cleaner recommended for fiberglass and follow the instructions on the
label of the product.
NOTICE
Do not use automatic dishwasher detergent, abrasives, bleaches, and
strong chemicals with acids/bases or ammonia.
• Wax the surface at least twice yearly to restore gloss and protect the finish.
Only use wax recommended for fiberglass and follow the instructions carefully.
NOTICE
Never wax a gelcoat surface in direct sunlight.
7.2. Maintaining the interiors
7.2.1. Plastic and painted surfaces
1. Wet the surface evenly with water before the actual cleaning.
2. Remove stains.
◦ Remove regular stains with a brush and a lightly diluted cleaner.
◦ Remove grease with a brush or a sponge and window cleaner.
3. Clean the surface afterwards with sponge and water.
4. Wipe dry with a piece of cloth.
7.2.2. Doors and hatches
• Clean the tracks of sliding doors and hatches regularly and lubricate, if necessary.
• Lubricate handles and locks with regular lock lubricant.
7.3. Maintaining the cover
New covers may leak initially, since the seams need to swell.
Axopar 22 Spyder Document ID: 22S202103EN
Owner's Manual
© 2021 Axopar Boats Page 48
-
-