Axopar 22 SPYDER, Руководство пользователя

Страница: 39 / 118

6. Operation
• Check the oil level in the pump before casting off.
The oil level must be approximately 10 mm below the filler hole.
• See the manufacturer's instructions for the steering system oil recommendation.
• For the steering systems provided by the engine manufacturer, see the engine manufacturer's
instructions.
6.1.3.2. Steering maintenance
• Check the couplings, mountings and bearings.
• For the maintenance of the steering system, see the manufacturer’s instructions.
6.1.4. Starting the engine
See the engine manufacturer’s manual for engine information:
1. Set the engine lever in neutral.
2. Turn the ignition on and check the fuel level.
3. Start the engine by turning the ignition key.
4. Check that the gauges for oil pressure and volt meter show normal values.
5. Run the engine to operating temperature at idling speed. Never rev up a cold engine.
DANGER
Risk of carbon monoxide poisoning.
Be aware of the risks with engine exhausts. For example, under turbulence or
disadvantageous wind conditions, exhaust can enter the boat. If this happens,
avoid idling the engines. If these problems occur under way, do not open the
hatches and ventilators, as it can worsen the problems. Instead, you may try
solving the problems by changing the boat’s speed or weight distribution.
WARNING
Never step onto the swim ladder when the engine is running. Stop the engine
while the steering and propeller are being inspected.
WARNING
Do not operate this boat with an engine that exceeds the maximum engine power
recommended by the manufacturer.
6.2. Swivel seat - Driver and passenger seats
The driver and passenger seats are operated with the locking handle.
The locking handle must be in the locked position when the boat speed exceeds 5 knots.
Axopar 22 Spyder Document ID: 22S202103EN
Owner's Manual
© 2021 Axopar Boats Page 38
-
-