Chapter 4: Wall Mounting an Axon Dock 15
TASER Axon Dock Installation Manual
Dimensions for an Axon Dock with a 6-Bay for Axon Flex 2 Systems
Note:
All dimensions are in inches (and centimeters).
You can use the overall size of the wall mount bracket to determine the spacing and fit between mul
-
tiple assemblies. The power input and Ethernet input are also shown above.
Step 1:
Preparation
1
Ensure that you have all necessary hardware and cables required to complete the installation.
2
Read all of the manufacturer’s installation instructions for both the dock and the Wall Mount
Bracket.
3
Decide if you will leave the cables showing or hide them in the wall behind your dock.
Step 2:
Attach the Dock to the Wall Mount Bracket
1
Place your dock on the Wall Mount Bracket.
2
Align the holes of the core unit with the holes on the bracket.
3
Use the screws provided in the dock wall mount kit to attach and mount the core portion of the
dock to the bracket.
4
Use the screws, washers, and wing nuts to mount the opposite end bay portion to the bracket.
5
Put the screws through the furthest set of mounting holes in the bay (making sure the core and
bays are securely mated together).
6
As the screws come out the back of the bracket, attach the washers and add the wing nuts.
7
Confirm that the core and bay units are securely mated.
8
Finish tightening all of the screws.
Step 3:
Identify Dock Placement
Determine the best wall location for mounting the dock.
1
Look for a location away from heat sources and direct sunlight that does not obstruct move-
