background image

 

 

 

 

 

WARNING

TO REDUCE THE RISK OF FIRE OR 

ELECTRICAL SHOCK, DO NOT EXPOSE THIS 

APPLIANCE TO RAIN OR MOISTURE

 

 

● ALWAYS disconnect your entire system from the AC mains before cleaning any component.  
● NEVER use flammable or combustible chemicals for cleaning components. 
● NEVER operate this product if any cover is removed. 
● NEVER wet the inside of this product with any liquid. 
● NEVER pour or spill liquids directly onto this unit. 
● NEVER block airflow through ventilation slots. 
● NEVER bypass any fuse. 
● NEVER replace any fuse with a value or type other than those specified. 
● NEVER attempt to repair this product. If a problem occurs, contact your local Axon distributor. 
● NEVER expose this product to extremely high or low temperatures. 
● NEVER operate this product in an explosive atmosphere. 

Warranty:

 Axon warrants their products according to the warranty policy as described in the general terms. 

That means that Axon Digital Design BV can only warrant the products as long as the serial numbers are not 

removed. 

 

Copyright © 2001 – 2016 AXON Digital Design B.V. 

Date created: 

 

31-05-2016 

 

Date last revised: 

31-05-2016 

 

Axon, the Axon logo and Synapse are trademarks of Axon Digital Design B.V. 

 

This product complies with the requirements of the product family standards for audio, video, audio-visual 

entertainment lighting control apparatus for professional use as mentioned below. 

 

 

 
EN60950 
EN55103-1: 1996 
EN55103-2: 1996 
 

 
Safety 
Emission 
Immunity 

 

 

Axon Digital Design        
CCP-4200B 

 

Tested To Comply 

With FCC Standards 
 

FOR HOME OR OFFICE USE 

 

 
This device complies with part 15 of the FCC Rules 
Operation is subject to the following two conditions: 
(1) This device may cause harmful interference, and 
(2)  This  device  must  accept  any  interference  received,  including 
interference that may cause undesired operation. 
 

 

 

Содержание Cerebrum CCP-4200B













Отзывы: