5
Axon Flex 2 User Manual
Chapter 2: Getting to Know Your Axon Flex 2 Camera
Upload Status LED
Indicates status when the camera is uploading data to the Evidence.com website via the Axon
Dock.
System Status
Upload Status LED
Initial connection (momentary)
Solid red (for 20 seconds or fewer)
In queue awaiting upload
Solid yellow
Device ready (all videos uploaded successful-
ly) and fully charged
Solid green
Device not assigned, agency mismatch, cam-
era set in the offline mode, or device error
Blinking red
Uploading data
Blinking yellow
Firmware update, internal battery charging,
extremely low battery, or memory full
Blinking red and yellow –
DO NOT remove the
camera from the Axon Dock
Transfer error, device re-trying to transfer
Blinking green and yellow
Network error (no connection)
Blinking red, yellow, and then green (cycling all
colors)
Axon Dock has no communication with the
cam-era. Contact Axon customer service.
LED off
Pressing buttons causes the Axon Flex 2 camera to emit audio alerts (beeps) to indicate system
actions. See
Chapter 5:
Notification Reference Tables
for more information.
Axon Flex 2 Cables and Connectors
Straight-to-Right-Angle Connector
The Axon Flex 2 camera and controller are designed to work with a purpose-built cable, with a
straight connector at one end and a right-angle connector at the other. Insert the straight con-
nector into the camera and the right-angle connector into the controller.
These cables are specifically calibrated to work with the Axon Flex 2 system. Use of unapproved
cables will degrade system performance and may cause the system to not function properly or
at all.
Ensure that your cables are inserted properly into the camera and controller. If the camera’s
battery is low, or the cable is disconnected, your recorded video will be lost.
USB Cable
A USB cable is available to connect the Axon Flex 2 camera directly to your computer. The cable
used with the Axon Flex 2 system is not the same as the cable used with the Axon Flex system.
The cables are not interchangeable.
Do NOT connect your Axon Flex 2 camera to your computer before you have installed the Evi-
dence Sync software.
