Axon APT5 Series, Руководство пользователя, Страница: 59 / 126

Frag Thresh If packet size (in bytes) exceeds threshold,
then packet is fragmented. An integer from 256 to
2346 2346
RTS Thresh Packet size above which RTS/CTS is required
on link. An integer from o to
2347 2347
LED Use of LED; DS5 is not supporting this
feature On, Off Off
Tray Icon Enabling of System Tray Icon. On, Off On
Hide Password
If this is On, then SCU as well as EAP
authentication dialog boxes mask passwords
and other sensitive information, such as WEP
keys.
On, Off Off
Admin Password Password that must be specified when
Admin Login button pressed. A sting of up to 64
characters SUMMIT
Auth Timeout Specifies the number of seconds that
Summit software waits for an EAP
authentication request to succeed of fail. If
authentication credentials are specified in the
active profile and the authentication times
out, the association fails. If authentication
credentials are not specified in the active
profile and the authentication times out,
then the user is prompted to re-enter
authentication credentials. An integer from 3 to
60 8
Certs Path Directory where certificate(s) for EAP
authentication are stored. A valid directory path
of up to 64 characters Depends on
device
Ping Payload Amount of data in bytes to be transmitted
on a ping 32,64, 128, 256, 512,
1024 32 bytes
Ping Timeout Amount of time in milliseconds that
transpires without a response before ping
request is consider a failure An integer from 1 to
30000 5000
Ping Delay ms Amount of time in milliseconds between
successive ping requests An integer from 0 to
7200000 1000
When global settings are changed on the window and
Commit is clicked, the changes take effect
immediately.
Two exceptions include the WMM and DFS Channels settings. If you change either of these settings, you
must do a power cycle or suspend/resume on the device to cause the change to take effect. To cause global
settings changes to take effect without a power cycle, Summit software may have to reset and re-establish the
WLAN connection between the Summit radio and the access point. If you make changes without clicking
Commit and attempt to move to a different SCU window, SCU displays a warning message and gives you the
option of saving your changes before you leave the Global window.