Axon APT5 Series, Руководство пользователя, Страница: 53 / 126

rates in megabits per second (Mbps): 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54.
- Default: Auto

Radio Mode – Use of 802.11 a, 802.11g, 802.11b, and 802.11n frequencies and data rates
when interacting with AP, or use of ad hoc mode to associate to a client radio instead of an
AP.
When SCU operates with a Summit 802.11g radio, an administrator can select from among
the following Radio Mode values:
- Value:
· B rates only – 1, 2, 5.5, and 11 Mbps
· G rates only – 6, 9, 12, 18, 24, 26, 48, and 54Mbps
· BG rates optimized – 1, 2, 5.5, 6, 11, 24, 36, and 54 Mbps. This should only be used
with Cisco APs running IOS in autonomous mode (without controllers, For Cisco APs
that are tied to controllers and for non-Cisco APs, Summit recommends BG rates full.)
Security Settings

EAP type – Extensible Authentication Protocol type used for 802.1x authentication to AP.
- Value: None, LEAP, EAP-FAST, PEAP-MSCHAP, PEAP-ETC, PEAP-TLS, EAP-TLS,
EAP-TTLS
- Default: None

Credentials – Authentication credentials for the selected EAP type.

Encryption – Type of encryption (and decryption) used to protect transmitted data.
- Value
· None: No encryption
· WEP: WEP with up to four static keys (40 bit or 128 bit in ASCII or hex) defined under
WEP/ PSK Keys.
· WEP EAP – WEP with key generated during EAP authentication
· WPA-PSK (WPA Personal) – TKIP with PSK (ASCII passphrase or hex PSK)
defined under WEP/PSL Keys.
· WPA-TKIP (WPA Enterprise) – TKIP with key generated during EAP authentication
· WPA CCKM (WPA Enterprise) – TKIP with key generated during EAP authentication and
with Cisco key management protocol for fast re-authentication
· WPA2-PSK (WPA2 Personal) – AES with PSK (ASCII passphrase or hex PSK) defined
under WEP/PSK Keys.
· WPA2-AES (WPA2 Enterprise) – AES with key generated during EAP authentication.
· WPA2-CCKM (WPA2 Enterprise) – TKIP with key generated during EAP authentication
and with Cisco key management protocol for fast re-authentication.