Axnes AS
Document number
Revision
Date
Page 2-18
Direct
–
Direct mode selected
Intercom
–
Intercom mode selected
Local
–
Entering Local mode
VOX
–
Entering VOX mode
PTT
–
Entering PTT mode
Charging
– Attached to battery charger
Battery low
– Low battery status
Shutting down
– System turn off
Temperature high
– Unit is operated above recommended temperature
Dynamic
– Headset with dynamic microphone connected
Non-amplified electret
– Headset with unamplified electret microphone connected
Amplified
– Headset with amplified electret microphone connected
Incorrect scrambling key detected
– Configured
scrambling key not compatible with base
station.
Saturated
– Radio signal in to MP30 is to strong. May occure if the MP30 is in very close
proximity to the BST50 antenna.
Visible
– MP30 Bluetooth set visible, to enable pairing.
Bluetooth connected
– Bluetooth link established between phone and MP30.
Bluetooth disconnected
– Bluetooth link between phone and MP30 disconnected
Incoming call
– Connected phone receives incoming call, ready to be answered over
Bluetooth link.
Outgoing call
– Connected phone places outgoing call, with audio over Bluetooth link to
MP30.
Phone call terminated
– Phone call via Bluetooth terminated.
Note: Some of the audio messages are dependent on the Bluetooth profile used to connect
the phone and therefore phone dependent.
In addition, there are audio feedback message for each of the menus.
