Axminster SIEG C1 MK2, Руководство пользователя

Страница: 3 / 24

Quantity Item Model Number
1 No. Micro Lathe with Chuck, Chuck Guard and Tool Post fitted. C1
Box containing:-
1 No. Set (3) External Jaws for Chuck
1 No. 8mm Square ‘T’ Chuck Key
3 No. Rod Handles (detached for packing)
1 No. Tailstock Dead Centre (1 x No.1 MT Morse taper)
1 No. Double Open Ended Spanner 5mm A/F x 5.7mm A/F
1 No. Nipple ‘C’ Spanner 28mm-32mm
1 No. Allen Key 2mm
1 No. Allen Key 3mm
1 No. Allen Key 4mm
1 No. Allen Key 6mm
2 No. ‘T’ Slot Keepers
1 No. Oiling Bottle
1 No. Spare Fuse (230v 1 Amp)
1 No. Manual
1 No. Guarantee Card
What’s in the Box?
03
Having unpacked your machine and its accessories, please check the contents against the
equipment list
"What’s in the box" , if there are any discrepancies, please contact Axminster
Power Tool Centre using the procedures laid down in the catalogue. Please dispose of the
packaging responsibly, much of the material is bio-degradable. The machine and its accessories
will arrive coated with heavy corrosion preventative grease. This will need to be cleaned from the
machine, its components and accessories prior to it being set up and commissioned. Use coal
oil, paraffin or a proprietary degreaser to remove the barrier grease. Be warned, it will stain if you
splash it on clothing etc., wear overalls, coverall et al., rubber gloves are also a good idea, as is
eye protection if your cleaning process tends to be a little bit enthusiastic. After cleaning, lightly
coat the exposed metal surfaces of the machine with a thin layer of light machine oil. N.B If you
used paraffin/kerosene make sure you apply this thin film sooner rather than later.
Please read the Instruction Manual prior to using your new machine; as well as
the installation procedure, there are daily and periodic maintenance recommendations to
help you keep your machine on top line and prolong its life. Keep this Instruction Manual
readily accessible for any others who may also be required to use the machine.
!