Note:
The Assembly requires a through table void of 280mm x 205mm. The recess for the
Machine Table is 306mm + 229mm + 6mm + deep. Because of the addition of the
hard point for the attachment of the Digital Readout Scale a notch needs to be cut in the
recess ledge. The dimensions and the position are shown on the next page.
05
Accessories...
There are hard points mounted on the chassis to enable a 100mm Digital Readout Scale
(410197)
to be mounted to the assembly. These scales also have the provision to accept
the Single Axis Remote Reader
(210068)
. The machine table has been prepared to allow for
the mounting of the Axminster Box Comb Jointer
(Part No.700308)
.
Machine table
hard point
Rise & fall platform hard point
100mm
D.R.O
Digital Readout Scale
(Part No.410197)
Single Axis Remote Reader
(Part No. 210068)
Cranked Spanners
(Part No. 991003 & 991004)
Short Collet Extension
(Part No. 211367)
Содержание Router Elevator
