Axminster RDC100H, Руководство пользователя

Страница: 7 / 16

07
Assembly
Lift the motor head assembly and remove
all the parts from inside the drum, if you
haven’t already done so. Replace the
motor head and clamping ring (A).
Locate one of the two hose clamps (C),
place over one of the ends of the
hose (B) and push the hose over the
dust extraction outlet.
Locate the 100mm Adaptor Moulding (D)
and the remaining hose clamp (C). Place
the clamp over the hose as before, insert
the adaptor (D) into the end of the hose
and tighten the hose clamp (C).
Secure the hose in position by
tightening the hose clamp (C)using
a flat edge screwdriver.
Secure the hose in position by
tightening the hose clamp (C)
using a flat edge screwdriver.
D
C
C
C
B
B
A
3
4
5
6
7
Dust extraction out