Axminster RDC100H, Руководство пользователя

Страница: 13 / 16

13
Changing the Micron Filter Bag
Maintenance
Replace the micron bag and filter assembly, push firmly so the assembly is flush up against the
motor casing. Lower the motor head assembly back onto the drum, replace the motor clamping
ring and lock it, securing it in position.
Connect the Vacuum Extractor to the mains and continue with operation.
Weekly
•CHECK the inlet duct, remove any accumulated debris.
•CHECK the inlet hose for splits and cracks, repair as necessary.
•CHECK the micron bag for wear and tear. If wear or fraying is occurring, replace the micron
bag, see pages 11 and 12 “Changing the Micron Bag”.
•CHECK the motor for dust, sawdust, shavings etc, build up. If this has occurred, blow out with
L.P. air or clean with a vacuum cleaner. (If ‘blowing out’ remember to wear eye protection and
dependent on the type of dust, consideration should be given to face masking).
•CHECK the drum container and empty if full.
Monthly
•Carry out the weekly checks.
•Dependent on usage clean the vacuum extractor over using a damp cloth.
DISCONNECT THE VACUUM EXTRACTOR
FROM THE MAINS SUPPLY
!
7
8