Axminster AWEBDS46 MkII, Руководство пользователя

Страница: 8 / 28

08
Assembly
Fig 2
Fig 3
M6 washer
Put the table assembly aside to fit later see page 9.
Shake proof
washers
Spanner
WARNING!!
DO NOT over tighten
remember this is a
casting
Clean the surface of the disc with a degreasing cleaner,
(methylated spirit; acetone nail polish remover borrowed
from the female side of the family, if you don’t have a
proprietary cleaner.) Allow to dry off and wipe over with a
clean dry cloth. Locate the sanding disc, peel the cover
from the adhesive surface and apply
CAREFULLY to the
disc. (See fig 4) Use a piece of cloth in your hand or wear
a glove, to firmly press the abrasive to the disc, the
application will be reinforced by a gentle sanding action
across the face when you first use the new sanding disc.
Fig 4
Sanding disc
Fitting the Sanding Disc