Axminster 700103, Оригинальное руководство пользователя

Страница: 6 / 41

2
1. Safety
This operating instructions
▲
explains the meaning and use of the warning notes included in these operating
instructions
▲ defines the intended use of the metal cutting bandsaw
▲ points out the dangers that might arise for you or others if these instructions are not
observed.
▲ informs you how to avoid dangers.
In addition to these operation instructions, please observe
▲ the applicable laws and regulations
▲ the statutory provisions for accident prevention
▲ the prohibition, warning and mandatory signs as well as the warning notes on the machine.
If required, the relevant measures to comply with the country-specific regulations must be taken
before commissioning the machine.
Always keep this documentation close to the metal cutting bandsaw.
1.1 Safety instructions for general machinery
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This
manual uses a series of symbols and signal words intended to convey the level of importance of the
safety messages. The progression of symbols is described below. Remember that safety messages
by themselves do not eliminate danger and are not a substitute for proper accident prevention
measures.
WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
•
Crystalline silica from bricks, cement and other masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals:
Work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.