Axminster 700103, Оригинальное руководство пользователя

Страница: 26 / 41

23
4.8 Setting the saw blade speed
WARNING!
Pull out the mains plug before you open the protective cover. Close and screw down the
protective cover after each change of speed.
▲
Disconnect the metal bandsaw from the power supply.
▲
Slacken the V-belt with the tensioning screw and Allen screw on the motor.
▲
Place the V-belt in the required position on the pulleys.
▲ Tighten the V-belt with the tensioning screw and Allen screw on the motor.
▲
Check the V-belt tension.
▲
Close and bolt down the protective cover.
INFORMATION
It is impossible to start the machine when the protective cover is not closed.
ATTENTION!
Ensure that the V-belt is tensioned correctly. Too high or too low tension of the V-belt can
cause damage.