Axminster 107679, Оригинальное руководство пользователя

Страница: 17 / 24

MAINTENANCE
17
1
4
2
1
DISCONNECT THE SANDER FROM
THE MAINS SUPPLY BEFORE
CONTINUING!
There is very little mechanical maintenance that can be
carried out on the machine. Most prudent maintenance
is preventative and concerned with keeping the machine
clean.
At reasonable intervals, inspect and remove all dust/resin
build up using a class ‘M’ vacuum cleaner.
Remove the worktable (B),side extraction panel/disc
extraction plate and clean any dust or resin build up.
Inspect the sanding disc for signs of wear and tear and
replace if necessarily. Re-assemble the sander.
WEAR A DUST MASK &
EYE PROTECTION WHEN
CLEANING YOUR SANDER!
Remove the linisher’s guard (E) or worktable (B) and clean
any dust or resin build up, inspect the sanding belt for signs
of wear and tear and replace if necessary. Re-assemble the
sander.
3
B
E
Linisher Drive Belt Tension
If you notice the belt stopping while under load and the
disc is still in motion this could mean a sign that the belt is
damaged or has become loose. To check, remove the drive
belt cover and examine the belt for signs of fraying and
missing teeth.
Continues Over...