manualshive.com logo in svg

Axminster Trade AT430DS, Оригинальное руководство пользователя, Страница: 3 / 42

Поделиться
Скачать
Axminster Trade AT430DS Скачать руководство пользователя страница 3

 

2

PREFACE 

We appreciate your purchase of our machine. This machine is designed and 

manufactured for efficient, heavy-duty operations. This manual concerns the 

operation, safety and maintenance of the machine. This manual should be kept 

readily available to the operator for reference. The operator should read this manual 

ca refully before operation to ensure safe, smooth operation of the machine. Our 

warranty will not apply if there is any improper operation or maintenance of the 

machine. 

When you receive the machine, please check the model, all accessories listed on the 

packing list and check if there are any parts damaged during transportation. If any 

part is missing or parts are found to be damaged, please immediately contact your 

local distributor or machine manufacturer. Again, we would like to thank you for your 

purchase. 

WARRANTY

 

If any part is proved to is defective within ONE YEAR from the date of purchase then 

the manufacturer or distributor shall repair or replace the part provided the defective 

part is returned immediately to the manufacturer or distributor. The manufacturer or 

distributor shall have no obligation to repair or replace those parts failing due to 

operator carelessness, misuse or due to any cause such as parts failing due to poor 

lubrication, inadequate cleaning, improper operating environment, improper utilities or 

operator error 

 

Содержание AT430DS











































Отзывы:

Нет отзывов