Loading a key with an Alternating macro:
Alternating macro commands alternate with pushes.
Simply drag and drop two commands to the same key,
and select Alternate in the Macro Type button
Example shows a typical alternating macro, where ON
+ S1 command is sent on the first push, while on the
second push the Off command is sent.
Loading a Key with a Long-Press function:
Drag and drop a command to a key, followed by the
long-press command but drop this onto the long-press
area in the key details.
The long press duration may be adjusted between 0.2
and 1.7 seconds using the slider
Some brands of equipment require repeats of the
command before they correctly operate, this can be
adjusted using the repeat adjustment.
The short press or long press functions may also be sequential
or alternating macros. Simply drop further commands into either the short or long-press tabs
in the programming details window.
Clearing a Key:
Right click over the key to be cleared and select Clear.
Configuring Axium Settings
Image 7 - The Axium settings window
The keypad may be quickly programmed to address an Axium Zone and its sub device the
preamplifier.
11
