Axis XF60-Q1765 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 54

background image

XF60-Q1765 Explosion-Protected Network Camera

About system options

AXIS Video MIB (Management Information Base) for video hardware can be used to monitor Axis-specific, hardware-related
issues that may need administrative attention. For more information about AXIS Video MIB and to download MIB files, go to

www.axis.com/support

To enable and configure SNMP in the Axis product, go to the

System Options > Network > SNMP

page.

Depending on the level of security required, select the version on SNMP to use.

Traps are used by the Axis product to send messages to a management system on important events and status changes. Check

Enable

traps

and enter the IP address where the trap message should be sent and the

Trap community

that should receive the message.

Note

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

Traps for SNMP v1/v2

are used by the Axis product to send messages to a management system on important events and status

changes. Check

Enable traps

and enter the IP address where the trap message should be sent and the

Trap community

that

should receive the message.

The following traps are available:

•

Cold start

•

Warm start

•

Link up

•

Authentication failed

Note

All AXIS Video MIB traps are enabled when SNMP v1/v2c traps are enabled. It is not possible to turn on or off specific traps.

SNMP v3

provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

To use SNMP v3, HTTPS must be enabled, see

HTTPS on page 35

. To enable SNMP v3, check the box and provide the initial user

password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see

to reset to factory default settings on page 47

.

UPnP

TM

The Axis product includes support for UPnP

TM

. UPnP

TM

is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

UPnP

TM

can be disabled under

System Options > Network > UPnP

.

RTP/H.264

The RTP port range and multicast settings are configured under

System Options > Network > RTP

.

The RTP port range defines the range of ports from which the video ports are automatically selected. For multicast streams, only
certain IP addresses and port numbers should be used.

Select

Always Multicast Video

to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating
systems and clients that support this protocol.

42

«
...
40
41
42
43
44
...
»

Содержание XF60-Q1765























































Отзывы:

Нет отзывов

Похожие инструкции для XF60-Q1765

Бренд: VCT Vision Страницы: 48

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 70

WVNF302 - NETWORK CAMERA

Бренд: Panasonic Страницы: 20

Бренд: Panasonic Страницы: 110

Бренд: Panasonic Страницы: 244

Бренд: Panasonic Страницы: 122

Бренд: DBI SALA Страницы: 120

Бренд: NELLYS SECURITY Страницы: 15

Бренд: Eneo Страницы: 16

Бренд: Vega Absolute Страницы: 26

Бренд: Newport Страницы: 2

Plus Ajax CombiProtect

Бренд: Solar Страницы: 2

Бренд: Novus Страницы: 40

NVIP-5DN3615AV/IR-1P/F

Бренд: Novus Страницы: 45

Vantage Pro2 GroWeather 6820

Бренд: DAVIS Страницы: 36

Бренд: YI Страницы: 22

GlassTrek DG457

Бренд: Paradox Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды