10/19/21, 7:42 PM
AXIS W100 Body Worn Camera User manual
https://help.axis.com/axis-w100-body-worn-camera
47/68
Important
Always dock your body worn camera after a shift. This ensures that:
Note
If a camera is not docked for eight weeks, it’s locked by the system for security reasons,
see
.
undocked. You must undock the camera within 15 seconds after tapping the self-assign
tag. Only one user can self-assign a camera at a time.
If you’re connecting the camera to a holster sensor, make sure that it is in the camera’s
range within 10 minutes after you undock the camera. Under normal circumstances the
range is 5–10 m (16–33 ft.).
When you undock the camera, it restarts. This takes about 20 seconds, after which the
camera is ready to use.
Clean the window, using a dry, nonabrasive cloth. See
recommendations.
Optionally, use the live view in AXIS Body Worn Assistant to check your camera image,
making sure that it is working properly and that the camera orientation is okay.
Ending a shift
the camera battery is charged before the next shift
all content is uploaded to the system controller
the camera’s software is up to date
camera settings and user configuration is synchronized with the system
When you dock the camera, it restarts. After about 10 seconds the status LEDs start
pulsing with amber light. After another 10 seconds the camera starts uploading content.
The docking status LED shows amber light.
It takes 3–6.5 hours to fully charge a depleted battery.
The time to upload recorded video varies. For example, 12 hours of recorded video can
take up to about 30 minutes to upload to the system controller, depending on the bitrate
of the video recordings.
AXIS W100 Body Worn Camera
