AXIS T85 PoE+ Network Switch Series
Setup examples
2. Under
Basic Settings
in the
Protocol Version
drop-down menu, select
RSTP
, and click
Apply
.
3. Go to
Advanced > Spanning Tree > Configuration > CIST Port
.
4. Under
CIST Normal Port Configuration
, make sure that
STP Enabled
is selected for the switch’s ports as follows:
-
Switch – 01: ports 25 and 26
-
Switch – 02: ports 17 and 18
-
Switch – 03: ports 9 and 10
5. Click
Apply
.
Note
If you want to make sure that a certain port is used as a primary communication link, enter
Path Cost
for that port under
CIST Normal Port Configuration
. If not specified, the switch chooses the port automatically. For example, if you want to use
port 17 as the primary communication link, enter
Path Cost
value 10 to port 25 and
Path Cost
value 50 to port 18.
To save the start-up configuration, click
on the product’s web page. See
Get to know your product’s web page on page 9
Reserve an IP address based on MAC address
1. Go to
Advanced > DHCP Server > Configuration > Pool
.
2. Click
Add New Pool
.
3. Enter a name for the pool, for example 00:01:02:03:04:05, and click
Apply
. No spaces are allowed in the name.
4. To access the pool settings, click the added name.
5. In the
Type
drop-down menu, select
Host
.
6. Enter other required settings, such as
IP
address,
Subnet Mask
and
Default Router
.
7. In the
Client Identifier
drop-down menu, select
MAC
.
8. In the
Hardware Address
field, enter F8-16-54-B2-35-63.
9. Click
Apply
.
To save the start-up configuration, click
on the product’s web page. See
Get to know your product’s web page on page 9
Set a PoE schedule
If you have a certain time frame where you want the switch to provide PoE, for example, to your cameras, it can be useful to create a
PoE schedule and assign it to one or more PoE ports. You can create up to 16 PoE schedule profiles.
To create a PoE schedule:
1. Go to
Advanced > PoE > Configuration > Schedule Profile
.
2. In the
Profile
drop-down menu, select a number for the profile.
3. Change the default profile name as needed.
4. To specify when you want PoE to switch on, select hours (
HH
) and minutes (
MM
) in the
Start Time
drop-down menu.
5. To specify when you want PoE to switch off, select hours (
HH
) and minutes (
MM
) in the
End Time
drop-down menu.
12
