Axis Q9216-SLV, Руководство пользователя

Страница: 41 / 60

AXIS Q9216-SLV Network Camera
The device interface
• Secondary SIP server : Turn on if you want the device to try to register on a secondary SIP server if registration
on the primary SIP server fails.
• Answer automatically : Select to automatically answer an incoming call.
• SIP secure : Select to use Secure Session Initiation Protocol (SIPS). SIPS uses the TLS transport mode to encrypt traffic.
• Proxies
- Proxy : Click to add a proxy.
- Prioritize : If you have added two or more proxies, click to prioritize them.
- Server address : Enter the IP address of the SIP proxy server.
- Username : If required, enter the username for the SIP proxy server.
- Password : If required, enter the password for the SIP proxy server.
• Video
- View area : Select the view area to use for video calls. If you select none, the native view is used.
- Resolution : Select the resolution to use for video calls. The resolution affects the required bandwidth.
- Frame rate : Select the number of frames per second for video calls. The frame rate affects the required
bandwidth.
• DTMF
- Use RTP (RFC2833) : Select to allow dual-tone multifrequency (DTMF) signaling, other tone signals and
telephony events in RTP packets.
- Use SIP INFO (RFC2976) : Select to include the INFO method to the SIP protocol. The INFO method adds
optional application layer information, generally related to the session.
- DTMF sequence : Click to add an action rule triggered by touch-tone. You must activate the action
rule in the Events tab.
- Sequence : Enter the characters to trigger the action rule. Allowed characters: 0–9, A-D, #, and *.
- Description : Enter a description of the action to be triggered.
SIP test call
SIP account : Select which account to make the test call from.
SIP address : Enter a SIP address and click to make a test call and verify that the account works.
Storage
Network storage
Add network storage : Click to add a network share where you can save recordings.
• Address : Enter the IP address or host name of the host server, typically a NAS (Network Attached Storage). We
recommend you to configure the host to use a fixed IP address (not DHCP since a dynamic IP address can change) or
that you use DNS. Windows SMB/CIFS names are not supported.
• Network share : Enter the name of the shared location on the host server. Several Axis devices can use the same
network share, since each device gets its own folder.
• User : If the server requires a login, enter the username. To log in to a specific domain server, type
DOMAIN\username
.
• Password : If the server requires a login, enter the password.
• SMB version : Select the SMB storage protocol version to connect to the NAS. If you select Auto , the device tries
to negotiate one of the secure versions SMB: 3.02, 3.0, or 2.1. Select 1.0 or 2.0 to connect to older NAS that don’t
support higher versions. You can read more about SMB support in Axis devices
here .
• Add share even if connection test fails : Select to add the network share even if an error is discovered during the
connection test. The error can be, for example, that you didn’t enter a password even though the server requires one.
Remove network storage : Click to remove the connection to the network share. This removes all settings for the network share.
Write protect : Turn on to stop writing to the network share and protect recordings from being removed. You can’t format a
write-protected network share.
Ignore : Turn on to stop storing recordings on the network share.
41