Axis Q9216-SLV, Руководство пользователя

Страница: 16 / 60

AXIS Q9216-SLV Network Camera
Configure your device
Detect tampering with input signal
This example explains how to trigger an alarm when the input signal is cut or short-circuited. For more information about the
I/O connector, see
page 58 .
1. Go to System > Accessories and turn on Supervised .
Create a rule:
1. Go to System > Events and add a rule.
2. Enter a name for the rule.
3. In the list of conditions, select Digital input .
4. Select a Port
5. In the list of actions, select Send notification to email and then select a recipient from the list.
- To create a new recipient, go to Recipients and click + Add recipient .
- To copy an existing recipient, go to Recipients , hover an existing recipient, open the context menu
and click Copy recipient .
6. Enter a subject and a message for the email.
7. Click Save .
Send an email automatically if someone spray paints the lens
Activate the tampering detection:
1. Click and select Legacy device interface .
2. Go to System > Detectors > Camera tampering .
3. Set a duration for Trigger after . The value indicates the time that must pass before an email is sent.
4. Turn on Trigger on dark images . This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
Add a recipient:
5. Go to System > Events > Recipients and click Add recipient .
6. Type a name for the recipient.
7. Select Email .
8. Type an email address to send the email to.
9. The camera doesn’t have it’s own email server, so it will need to log into another email server to be able to send mails. Fill
in the rest of the information according to your email provider.
10. To send a test email, click Test .
11. Click Save .
Create a rule:
12. Go to System > Events > Rules and click Add a rule .
13. Type a name for the rule.
14. In the list of conditions, select Tampering .
16