AXIS Q6075-S PTZ Network Camera
Additional settings
8. Click
Add
to add the preset positions that you want in your guard tour.
9. Click
Done
to exit the guard tour settings.
10. To schedule the guard tour, go to
System > Events
.
View and record video
To learn more about settings for viewing and recording video, see
Streaming and storage on page 17
.
Reduce bandwidth and storage
Important
If you reduce the bandwidth it can result in loss of details in the picture.
1. Go to live view and select
H.264
.
2. Go to
Settings > Stream
.
3. Do one or more of the following:
-
Turn on the Zipstream functionality and select the desired level.
Note
The zipstream settings are used for both H.264 and H.265.
-
Turn on dynamic GOP and set a high GOP length value.
-
Increase the compression.
-
Turn on dynamic FPS.
Note
Web browsers do not support H.265 decoding. Use a video management system or application supporting H.265 decoding.
Set up network storage
To store recordings on the network, you need to set up network storage:
1. Go to
Settings > System
>
Storage
.
2. Click
Setup
under
Network storage
.
3. Enter the IP address of the host server.
4. Enter the name of the shared location on the host server.
5. Move the switch if the share requires a login, and enter username and password.
6. Click
Connect
.
Record and watch video
To record video you must first set up network storage, see
Set up network storage on page 11
, or have an SD card installed.
Record video
1. Go to the camera’s live view.
2. To start a recording, click
Record
. Click again to stop the recording.
11
