Axis Q6034-C PTZ Скачать руководство пользователя страница 35

Страница: 35 / 60

AXIS Q6034-C PTZ Dome Network Camera

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that defines how and when the action is triggered is called an

Action Rule

Available Action Rule

triggers

and

conditions

include:

•

Applications

— use installed applications to trigger the rule, see

Applications, on page 34

•

Detectors

Motion Detection

— trigger the rule when motion is detected, see

Motion Detection, on page 32

•

Hardware

Open Casing Detection

— trigger the rule if the casing of a connected external device, such as a junction

box or cabinet (not included), is removed or opened. This can for example be used to send notifications of
maintenance or unauthorized tampering.

Network

— trigger the rule if network connection is lost or restored. This can for example be used to start

recording to the SD card.

•

Input Signal

Manual Trigger

— trigger the rule using the

Manual Trigger

button in the Live View page, see

Controls on

the Live View Page, on page 12

. This can for example be used to validate actions during product installation

and configuration.

•

PTZ

Autotracking

— trigger the rule when autotracking starts or stops, see

Autotracking, on page 27

•

Storage

Available

— trigger the rule when the storage device is unmounted or removed. This can for example be

used to send maintenance notifications.

Full

— trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be

overwritten to prevent the storage device from becoming full.

Locked

— trigger the rule if the storage device is locked (write protected).

•

System

System Initializing

— trigger the rule when the product is being started. This can for example be used to send a

notification when the product restarts.

•

Time

Recurrence

— trigger the rule periodically, see

Recurrences, on page 37

. This can for example be used to upload

an image every 5 minutes.

Use Schedule

— trigger the rule according to the selected schedule, see

Schedules, on page 37

Available

actions

include:

•

PTZ Control

Autotracking

— start autotracking, see

Autotracking, on page 27

Preset Position

— go to a preset position.

Guard Tour

— start a guard tour, see

Guard Tour, on page 29

Содержание Q6034-C PTZ





























































Результаты поиска

Содержание Q6034-C PTZ

Отзывы:

Похожие инструкции для Q6034-C PTZ

Бренды по названию

Популярные бренды

Axis Q6034-C PTZ, Руководство пользователя

Результаты поиска

Содержание Q6034-C PTZ

Отзывы:

Похожие инструкции для Q6034-C PTZ

Бренды по названию

Популярные бренды