AXIS Q3819-PVE Network Camera
Additional settings
4. To open the gate whenever an event is triggered, select
Closed circuit
in the drop-down list.
Create rules
1. Go to
Settings > System > Events
and add a rule.
2. Type a name for the rule, for example “Open gate”.
3. In the list of conditions, select
PIR detector
.
4. In the list of actions, select
Toggle I/O once
.
5. In the list of ports, select
Gate switch
.
6. Set state to
Active
.
7. Set the duration.
8. Click
Save
.
Trigger an alarm if someone opens the housing
This example explains how to trigger an alarm if someone opens the housing.
Create a rule:
1. Go to
Settings > System > Events
and add a rule.
2. Type a name for the rule.
3. In the list of conditions, select
Casing open
.
4. In the list of actions, select
Send notification to email
.
5. Select a recipient from the list or go to
Recipients
to create a new recipient.
To create a new recipient, click
. To copy an existing recipient, click
.
6. Type a subject and a message for the email.
7. Click
Save
.
Set up the intrusion alarm
Before you start
•
Connect the intrusion alarm switch to pin 1 (ground) and pin 3 (digital I/O) of the camera’s I/O connector.
Configure the input port
1. Go to
Settings > System > I/O ports
.
2. For
Port 1
:
18
