AXIS Q3819-PVE Network Camera
Additional settings
•
Configure the LED to turn on when live stream is active to indicate that a person or a program is accessing a stream from
the camera. Select
Live stream accessed
as a condition.
Open the lock to a gate when someone is nearby
This example explains how to direct the camera and open a gate when someone wants to enter during daytime. This is done by
connecting a PIR detector to the product’s input port and a switch relay to the product’s output port.
Required hardware
•
Mounted PIR detector
•
Switch relay connected to the gate lock, in this case the switch is normally closed (NC)
•
Connecting wires
Physical connection
1. Connect the wires from the PIR detector to the input pin, see
2. Connect the wires from the switch to the output pin, see
Configure I/O ports
You need to connect the switch relay to the camera from the camera’s webpage. First, configure the I/O ports:
Set the PIR detector to an input port
1. Go to
System
>
I/O ports
.
2. Select
Input
in the
Port 1
drop-down list.
3. Give the input module a descriptive name, for example “PIR detector”.
4. To trigger an event whenever the PIR detector senses motion, select
Open circuit
in the drop-down
list.
Set the switch relay to an output port
1. Go to
System
>
I/O ports
.
2. Select
Output
in the
Port 2
drop-down list.
3. Give the output module a descriptive name, for example “Gate switch”.
17
