Axis Q3518-LVE Скачать руководство пользователя страница 18

Страница: 18 / 21

AXIS Q3518-LVE Network Camera

Specifications

To find the latest version of the product’s datasheet, go to the product page at

axis.com

and locate

Support & Documentation

LED Indicators

Note

• The Status LED can be configured to flash while an event is active.

Status LED

Indication

Unlit

Connection and normal operation.

Green

Steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade or reset to factory default.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

Status LED behavior and buzzer signal for leveling assistant

For information on the function button used for leveling the image, see

page 18

Color

Buzzer

Camera position

Fixed green

Continuous beep

Level

Flashing green

Fast beeps

Almost level

Flashing orange

Medium beeps

Not level

Flashing red

Slow beeps

Far from level

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports microSD/microSDHC/microSDXC cards.

For SD card recommendations, see

axis.com

microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are

trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button

The control button is used for:

•

Resetting the product to factory default settings. See

Reset to factory default settings on page 15

Содержание Q3518-LVE






















Результаты поиска

Содержание Q3518-LVE

Отзывы:

Похожие инструкции для Q3518-LVE

Бренды по названию

Популярные бренды

Axis Q3518-LVE, Руководство пользователя

Результаты поиска

Содержание Q3518-LVE

Отзывы:

Похожие инструкции для Q3518-LVE

Бренды по названию

Популярные бренды