AXIS Q1931–E PT Mount Thermal Network Camera
Hardware Overview
Power Connector
2-pin terminal block for power input. Use a Safety Extra Low Voltage (SELV) compliant limited power source (LPS) with either a rated
output power limited to
≤
100 W or a rated output current limited to
≤
5 A.
RS485/RS422 Connector
Two terminal blocks for RS485/RS422 serial interface used to control auxiliary equipment such as PTZ devices.
SD Card Slot
A microSD card (not included) can be used for local recording with removable storage. For more information, see
Technical
Specifications on page 53
.
NO
NO
NOTICE
TICE
TICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to
Setup > System
Options > Storage > SD Card
and click
Unmount
.
Control Button
The control button is used for:
•
Resetting the product to factory default settings. See
page 48
.
•
Connecting to an AXIS Video Hosting System service. See
page 41
. To connect, press and hold the button for about 3
seconds until the Status LED flashes green.
•
Connecting to AXIS Internet Dynamic DNS Service. See
page 41
. To connect, press and hold the button for about 3 seconds.
LED Indicators
LED
Color
Indication
Green
Connection and normal operation
Amber
Steady during startup. Flashes during firmware upgrade.
Amber/red
Flashes amber/red if network connection is unavailable or lost.
Status
Red
Flashes red for firmware upgrade failure.
7
