Axis Q1775-E, Руководство по установке

Страница: 20 / 112

AXIS Q1775-E Network Camera
Connect the Cables
1. Optionally connect external input/output devices. See Connectors on page 16 for
information on the connector pins.
2. Connect the network cable to the network connector in the housing.
NO NO NOTICE TICE TICE
Due to local regulations or the environmental and electrical conditions in which the
product is to be used, a shielded network cable (STP) may be appropriate or required. Any
network cables that are routed outdoors or in demanding electrical environments shall be
shielded (STP) and intended for their specific use.
Access the Product
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products
on the network and assigning them IP addresses in Windows®. Both applications are free and can
be downloaded from
www.axis.com/techsup
The product can be used with most operating systems and browsers. The recommended browsers are
• Internet Explorer
®
with Windows
®
• Safari
®
with OS X
®
• Chrome
TM
or Firefox
®
with other operating systems.
For more information about using the product, see the User Manual available at www.axis.com
Reset to Factory Default Settings
Important
Reset to factory default should be used with caution. A reset to factory default will reset
all settings, including the IP address, to the factory default values.
Note
The installation and management software tools are available from the support pages
on
www.axis.com/techsup
To reset the product to the factory default settings:
1. Disconnect power from the product.
2. Press and hold the control button and reconnect power. See
Hardware Overview on
page 10 .
3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes
amber.
20